Salta al contenuto
  • Contact Us
  • Italiano
    • Inglese
    • Spagnolo
    • Tedesco
    • Francese
    • Olandese
    • Polacco
    • Russo
    • Albanese
    • Lituano
    • Vietnamita
  • Home
  • chi siamo
  • Blog
  • prodotti
  • caratteristiche dei prodotti
  • grossisti
  • contatto
  • Supporto
  • Italiano
    • English
    • Español
    • Deutsch
    • Français
    • Nederlands
    • polski
    • Русский
    • Albanian
    • Lietuvos
    • Tiếng Việt

Troubleshooting: Testing the Logicfan™ Temperature Controller


16 Gen, 2020 | Support

If you think your controller is not functioning, please run through the following steps before starting an RMA.

Check Power

  • Check mains socket is active.
  • Check fan is active when plugged directly into mains socket.

If fan and mains socket are functioning normally

  • Set up controller as per User Instruction

If there is still no power to controller

  • Start RMA.

Basic mode

  • Set Dial 2 set to ‘Dimmer’

Dial 1 should control fan speed between 0-100%
If this does not happen

  • Start RMA

Logic Mode

  • Set Minimum Fan Speed to its lowest setting.
  • Turn Temperature Dial to 10 degrees

After a short time, fans should start to speed up to Maximum Fan Speed

  • Turn Temperature Dial to 45 degrees

After a short time, fans should start to slow down to Minimum Fan Speed.
If this does not happen

  • Start RMA

Posts navigation

PREVIOUS


Choosing the right fans for Mission Controls

NEXT


Troubleshooting: Testing the DigiStep™ Temperature Controller

  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti
  • Home
  • chi siamo
  • prodotti
  • caratteristiche dei prodotti

© 2019 Mission Controls® part of the EMG Controls group. All Rights Reserved.

×